Name: CORINTH High Performance Iridium Spark Plugs | OEM Replacement for Gasoline Engines—BKR6EIX
Brand: CORINTH
SKU: BKR6EIX
Rating: 5.0 (29 reviews)

Certifications	IATF16949
Model	K7RTCI/BKR6EIX/NGK IFR6T11//NGK PFR6Q/NGK BKR6E/NGK 7092/NGK 2272/NGK 6418
OE ON	9091901217/A113707110CA/3707010A01/MN163236/J18V3606111
Vehicle Compatibility	MERCEDES-BENZ/TOYOTA/LAND ROVER/ALFA ROMEO/CITROEN/PEUGEOT /CHEVROLET/CHRYSLER/HONDA/FORD/KIA/DAIHATSU/MAZDA/ISUZU/MG/MITSUBISHI/NISSAN
Electrode Material	Iridium / Double Iridium / Platinum / Iridium-Platinum / Nickel Alloy (selectable)
Product Brand	CORINTH (OEM/ODM available）
Product Code	KLT9001
Spark Gap	0.8mm / 1.0mm / 1.1mm / 1.2–1.3mm (pre-set to OE spec)
Product Attributes	Thread length: 19mm
	Thread diameter: 14 mm
	Wrench size: 16 mm
	Installation torque: 25-30N·m

Developed specifically for vehicles operating in challenging conditions that cause rapid plug fouling – such as frequent short trips, stop-and-go urban traffic, cold climate operation or older engines with higher oil consumption – CORINTH multi-electrode nickel spark plugs use multiple ground electrodes to maintain reliable ignition even when insulator fouling occurs.

Core Features & Benefits

· Multiple Ground Electrode Configuration Instead of a single side electrode, these plugs feature two, three or four ground electrodes arranged symmetrically around the center electrode. This design provides multiple spark gaps, so if one gap becomes fouled with carbon or oil deposits, the spark automatically jumps to the next clean gap. This built-in redundancy dramatically reduces misfires caused by fouling, extending usable service life in harsh operating environments.

· Superior Anti-Fouling Performance The multi-electrode layout, combined with a carefully calibrated insulator heat range, keeps more of the spark area exposed and self-cleaning during low-temperature operation. During short-trip driving where the engine never reaches full operating temperature, carbon deposits form more slowly and are less likely to cause misfire. For older engines with slight oil consumption, the multiple gaps maintain ignition reliability longer than single-electrode designs.

· Robust Nickel Alloy Construction All electrodes are manufactured from high-grade nickel alloy with copper core center electrodes for good heat dissipation. The robust electrode construction resists wear under normal operating conditions, and the multiple electrodes distribute spark erosion across multiple contact points, slowing overall gap growth. The heavy-duty steel shell with corrosion-resistant coating ensures long service life even in damp or salt-exposed environments.

· Low-Maintenance Solution for Urban & Cold Climate Use For delivery vehicles, city taxis and commuter cars that spend most of their time in stop-and-go traffic, multi-electrode plugs reduce the frequency of plug cleaning and replacement. For drivers in cold northern climates where short-trip fouling is a common issue, these plugs deliver more reliable winter starting and smoother cold operation. They are also an excellent choice for older vehicles where single-electrode plugs foul quickly.

Ordering & Supply Specifications

Our multi-electrode anti-fouling spark plugs are primarily offered in durable nickel alloy with a 30,000–40,000 km service life, with premium platinum (up to 80,000 km) variants available for high-mileage urban fleets. All manufacturing follows IATF 16949 and ISO 9001 quality management protocols, and E-Mark certification is available on request for applicable models. The standard MOQ starts at 1,000 pcs, with negotiable trial order quantities for urban fleet operators and regional distributors. Packaging options include individual blister packs, 4pcs or 10pcs retail boxes, and bulk workshop packaging, with custom branded packaging available for volume customers. Popular urban fleet SKUs are kept in stock for 7–10 day delivery, while bulk custom orders have a production lead time of 15–25 days. We accept T/T, L/C and Western Union for wholesale orders, with PayPal supported for sample and trial purchases. All plugs come with a 12-month / 30,000 km warranty against manufacturing defects.

CORINTH multi-electrode nickel spark plugs are available in popular thread sizes and heat ranges for a wide variety of passenger cars and light commercial vehicles. We offer bulk wholesale pricing for taxi fleets, delivery companies and urban repair shops serving markets with heavy stop-and-go traffic.

Precision Manufacturing

Advanced CNC machinery and automated production lines deliver micron-level accuracy on every brake component, ensuring consistent fit and performance across the entire product range.

OE-Standard Quality Control

Every batch undergoes rigorous inspection — from raw material testing to final dimensional verification — matching original equipment specifications for reliability you can trust.

High-Efficiency Production Capacity

Streamlined workflows and smart factory scheduling enable large-volume order fulfillment without compromising lead times or product consistency.

Certified Compliance

Manufactured under IATF 16949 certified processes with ECE R90 and AMECA validated products, meeting global regulatory standards for safety and durability.

End-to-End Traceability

Full production data tracking from forging to packaging gives complete quality transparency and rapid issue resolution at every stage.

CORINTH spark plugs are manufactured and validated under a rigorous, globally recognized certification framework, ensuring full compliance with automotive industry standards and smooth market access for distributors and importers worldwide.

IATF 16949 & ISO 9001 Certified Manufacturing System

All production operations take place in our purpose-built facility certified to both IATF 16949 — the international gold standard for automotive quality management systems — and ISO 9001 for general quality assurance. This dual certification mandates standardized, auditable processes across every stage of production, from raw material incoming inspection and electrode fabrication to final assembly and packaging. Every process parameter is documented and regularly audited to eliminate batch-to-batch variability and uphold consistent production quality at scale.

Alignment with ISO International Spark Plug Standards

Every spark plug model is engineered and produced in strict alignment with two core ISO industry specifications: ISO 11565 for spark plug performance and durability requirements, and ISO 28741 for dimensional interchangeability standards. This strict adherence to universal industry norms ensures consistent ignition performance, reliable heat range characteristics, and 1:1 dimensional compatibility with original equipment and major aftermarket brand equivalents. Distributors can confidently integrate CORINTH spark plugs into their catalogs with guaranteed fitment accuracy.

100% Inline Quality Testing for Every Unit

To minimize defect rates and guarantee uniform product consistency, every individual spark plug undergoes full inline testing before leaving the production line. This mandatory end-to-end inspection regime includes: high-voltage insulation testing to verify dielectric integrity, airtight sealing testing to confirm combustion chamber leak resistance, precision spark gap measurement to ensure ignition accuracy, and resistance value calibration to ensure proper EMI suppression. Only units that pass all four test stages proceed to packaging.

Regional Market Certification & Full Batch Traceability

For distributors targeting specific regional markets, E-MARK certification is available upon request to support regulatory compliance for European and EMEA sales. Every wholesale order is accompanied by complete batch traceability documentation, including raw material sourcing records, production parameter logs, and finished product test reports. This full traceability simplifies customs clearance, third-party quality audits, and after-sales issue tracking for our distribution partners.

Q: What certifications do your spark plugs have?

A: All CORINTH spark plugs are manufactured in facilities certified to IATF 16949 (the global automotive-specific quality management standard) and ISO 9001 for general quality assurance. Full production is strictly aligned with ISO 11565 international spark plug performance standards and ISO 28741 dimensional interchangeability specifications, ensuring OE-equivalent quality, fitment and interchangeability.For customers targeting European and EMEA markets, E-MARK certification is available upon request for eligible models. Every wholesale shipment comes with complete batch traceability documentation, including raw material certificates and production test reports, to support smooth customs clearance and third-party quality audits.

Q: Do you provide OEM / private label service?

A: Yes, we offer full OEM, ODM and private label solutions for automotive brands, importers and parts retail chains. Customization covers every level of the product and packaging:

Product marking: Laser-engraved or stamped brand logos, custom part numbers, and tailored heat range / resistance value / electrode specifications
Packaging design: Custom-printed retail boxes, blister cards, inner cartons and master export cartons with your brand artwork and information
ODM development: Custom electrode formulations, structural designs and performance tuning for specialized vehicle or industrial applicationsOur in-house engineering and design team supports the full project cycle from prototype sampling to mass production, helping you build a branded product line aligned with your market positioning.

Q: What is your minimum order quantity?

A: Our standard MOQ varies by order type to fit different business scales:

Stock standard models: 1,000 pcs per SKU, with mixed SKU consolidation supported for bulk shipments
Custom OEM / private label orders: 5,000 pcs per SKU, with flexible adjustment based on customization complexityWe accept small trial orders for new customers to verify product quality and test local market demand, with negotiable minimums for initial cooperation. For long-term partners, we also offer dynamic MOQ adjustment to support lean inventory planning.

Q: How do I find the correct spark plug model for my application?

A: Our technical team maintains a comprehensive cross-reference database covering over 95% of global gasoline engine applications, including passenger cars, light commercial vehicles, motorcycles and small power equipment. You can provide any of the following information for fast, accurate matching:

Original equipment (OE) factory part number
Equivalent competitor brand part number
Full vehicle details: brand, model, model year, engine code and displacement.Our team will verify fitment, heat range compatibility and specification matching, and reply with the corresponding CORINTH part numbers and detailed spec sheets within 24 working hours. Custom regional fitment catalogs can also be provided for distribution partners upon request.

Q: What is the lead time for bulk orders?

A: Lead time depends on inventory status and customization requirements:

Stock items with standard packaging: 7–10 working days from payment confirmation
Mass production orders (custom specifications, private label packaging): 15–25 working days from order confirmation and artwork approvalFor peak season or large-volume annual orders, we recommend placing bookings 4–6 weeks in advance to secure production capacity. We provide real-time order status updates throughout production and shipping, so you can plan your inventory and sales schedule accurately.

Q: Can I request samples before placing a bulk order?

A: Yes, we offer sample orders for quality evaluation and fitment testing prior to bulk purchase.

Sample policy: Up to 10 pcs of standard stock models are provided free of charge. Custom engraved or special-spec samples require a small sampling fee, which can be fully deducted from your first formal bulk order.
Shipping arrangement: The buyer covers courier shipping costs. We can ship via DHL, FedEx, UPS or your designated freight forwarder.
Sample lead time: 3–5 working days from request confirmation. All samples are drawn directly from regular production batches, so their material, workmanship and performance are 100% consistent with mass production goods.

Q: What is your warranty policy?

A: All CORINTH brand spark plugs are covered by a 12-month / 30,000 km warranty (whichever comes first) against manufacturing defects under proper installation and normal operating conditions.

Coverage scope: Defects in materials, workmanship or manufacturing that cause premature failure, such as internal sealing faults, dimensional non-conformity or raw material defects
Exclusions: Damage caused by improper installation, incorrect heat range selection, engine mechanical faults, fuel system abnormalities, modified engines or abnormal operating conditions
Claim process: Simply provide photos of the failed plugs, production batch number and failure description, and our after-sales team will complete verification within 3–5 working days. Valid claims are resolved via replacement product or account credit, at the customer’s option.

Q: What packaging options are available?

A: We offer both standard export packaging and fully custom branded packaging to suit different sales channels and market requirements:

Standard export packaging: Each plug is sealed in an individual anti-rust blister pack, then packed in neutral inner boxes (4 pcs or 10 pcs per box) and reinforced seaworthy export cartons, with palletization available for full container shipments. This option is ideal for wholesale distribution and workshop supply.
Custom branded packaging: Full custom printed retail boxes, blister cards, hanging packs and multi-language labeling with your brand logo, product specifications and regulatory markings. We can also adjust packing specifications, SKU combinations and carton dimensions to match your warehouse management and retail display needs.